A camera on its own captures a little; the right GoPro fishing accessories let it capture a lot more. Mounts put the lens where the action happens, floating handles keep the camera from sinking, spare batteries and fast memory cards keep it recording, and cases, cloths and tethers protect it from the water that anglers spend all day beside. Fishtrail Outfitters focuses on GoPro and action camera accessories alongside fish finders and marine GPS, so this guide explains which items matter most, why they matter and how to choose between them. Use it to build a lean, reliable kit that fits in a small pouch and gets used on every trip.
Why GoPro fishing accessories matter more than the camera
Fishing puts unusual demands on a camera. It sits in spray, vibrates on boats, gets dropped on decks and runs for hours in heat or cold. Accessories solve those problems.
They put the camera where the action is
A camera held in your hand is only available when your hands are free. Mounts keep it recording while you fish, and they let you choose angles that would otherwise be impossible.
They protect your investment
Floating handles, tethers and cases stop a small slip from becoming an expensive loss. A few small accessories cost far less than replacing a camera.
They extend recording time
Batteries, power handles and memory cards determine how long you can film. Running out halfway through the best morning of the season is avoidable.
Mounts: the core of any kit
Most anglers need three or four mount types.
Clamp mounts
A good clamp attaches to rails, poles and rod holders and is the most versatile fishing mount. Choose one with a strong locking mechanism. Our GoPro boat mount guide explains where to place them.
Suction mounts
Suction cups hold on smooth surfaces and are quick to move, but they need clean, flat contact. Use a tether as a backup.
Chest and head mounts
These give a first-person view for casting and fighting fish. See our GoPro chest mount guide.
Pole and extension arms
A short pole raises the camera for a different perspective, and it can be used to lower the camera toward the water. Keep poles short and stiff.
Floating handles and cases
Buoyancy is an angler’s best friend.
Floating handles
A floating handle lets you hold the camera for close shots and keeps it afloat if you drop it. It is among the best-value accessories you can own. Our floating case and handle guide covers options.
Waterproof cases and housings
A housing adds protection for deeper or rougher use. Read our waterproof case guide for details.
Lens covers and anti-fog inserts
A clear lens is essential. Carry a spare cover, a soft cloth and anti-fog inserts for humid mornings.
Power and storage
A camera is only useful while it is recording.
Spare batteries
Carry at least one spare, and keep them warm in cold weather. See our GoPro battery tips.
Power handles and USB mounts
For long days, an external power source keeps the camera running. Our GoPro power handle guide shows the options.
Memory cards
Use a fast, reliable card from a trusted brand, and carry a spare. Our memory card guide explains how to choose.
Remote control and monitoring
Controlling a camera on a distant mount saves time.
Remotes and voice control
A remote lets you start and stop recording without reaching for the camera. Voice control can help when your hands are full. See our remote and voice control guide.
Live view
A phone app lets you check framing before you start. Test it at the ramp.
Protection and safety
Keep everything secure.
Tethers and lanyards
A tether between the camera and the boat prevents loss. Use a floating lanyard where possible.
Saltwater care
Rinse accessories after use, especially clamps and screws. Our saltwater protection guide explains the routine.
A padded pouch
A small padded pouch keeps your kit together and protects the camera between trips.
Building your kit step by step
You do not need everything at once.
- Start with a camera, a clamp, a floating handle and a spare battery.
- Add a chest mount and a fast memory card.
- Add a power handle for long days.
- Add a second clamp or suction mount for extra angles.
- Add cases, filters and cleaning gear as you need them.
Accessory checklists for different anglers
Different anglers will pack different kits, and thinking about your own style makes shopping simpler.
The kayak angler
Space and weight are limited, so choose a small clamp, a floating handle, a tether and a compact power bank. A low-profile mount that fits scupper holes or tracks keeps lines clear of the camera.
The boat angler
Boats offer many mounting points, so a pair of clamps, a suction mount, a pole and a power handle cover most situations. A second camera and spare cards help on tournament days.
The shore angler
A small tripod or clamp for a rod holder, a chest mount for casting and a rugged case for sand and spray are useful. Our shore fishing camera mount guide covers this style of fishing.
Looking after your accessories
Accessories wear out, so check them regularly. Inspect clamps for cracks, rubber pads for hardening and screws for corrosion. Replace anything that looks weak before it fails on the water. Rinse everything after salt exposure, dry it on a towel and store it in a labelled pouch so you can find each item quickly. If a mount feels loose or a case no longer seals properly, replace it rather than gamble with the camera. A small amount of care means your kit lasts for seasons, and it keeps the camera safe on every trip you take.
Budgeting for your kit
It helps to decide in advance how much of your fishing budget goes to filming. Spend first on protection and power: a floating handle, a tether, a spare battery and a reliable memory card. Spend second on versatility: a clamp and a chest mount. Spend last on extras such as extra housings, filters and specialised poles. Buying in this order means every purchase solves a real problem, and you avoid an overflowing drawer of gadgets that never see the water. If you are unsure which accessories your camera model accepts, check the product page or ask our team before you order.
Avoid duplicates
Many mounts do the same job in slightly different ways. Choose one good clamp before buying three cheap ones, and test it for a season before expanding. Quality mounts last, and they keep the camera exactly where you aimed it.
Keep spares of small parts
Thumbscrews, rubber pads and quick-release buckles are small and easy to lose in a boat. A few spares in your pouch cost very little and can save a day of filming when something goes missing.
Frequently asked questions
What is the first accessory I should buy?
A floating handle and a clamp mount cover safety and versatility.
Are third-party accessories safe to use?
Many work well, but check compatibility and quality before relying on them over water.
Do I need a power handle?
For long days or time-lapses, yes. For short trips, spare batteries may be enough.
How do I keep accessories from corroding?
Rinse after saltwater use and dry them before storage.
Pack the right kit
The best GoPro fishing accessories are the ones that protect your camera, put it where the action is and keep it running. Start with a handful of essentials, add what you need as you learn and keep everything clean and organised. Browse GoPro accessories in our shop, and contact us if you would like help choosing mounts and gear for your style of fishing.
Related reading from Fishtrail Outfitters
- GoPro Battery Tips: Keep Your Camera Recording All Day on the Water
- Best GoPro for Fishing: What to Look For and How to Set It Up
- GoPro Kayak Fishing Setup: Mounts, Tethers and Camera Angles
- Waterproof Cases for GoPro: When You Need One and How to Choose
Products mentioned in this guide
- Volta handle for GoPro camera with power supply
- GoPro camera mounting and accessory kit
- Adhesive GoPro camera mounts
Further reading: GoPro official website · Take Me Fishing: how to get started and where to fish
Questions before you buy? Contact Fishtrail Outfitters or browse the shop.
